VDO Cyclecomputing C05 Guía de usuario descargar pdf (Pagina 23)

If the computer has a standard DVI or DFP -compliant digital video card or

video output port, use an optional digital video cable or DVI analog cable to

connect the monitor port of the computer to the Computer 1 port at the rear of

the projector. The type of connection cable used will vary depending on the

specifications for the computer's monitor port.

See “Appendix: Optional Accessories” (P.100)

Tip :

• You may need to change the computer settings when switching the computer output to

digital RGB. Refer to the documentation for the computer for details.

• If you are connecting a computer with a mini D-Sub 15-pin output port to the projector

at the same time, connect the computer with the mini D-Sub 15-pin output port to the

Computer 2/Component Video port of the projector.

• After making the connections, change the Comp1 Input setting in the Setting menu to

Digital-RGB. (P.69)

If the monitor port is a digital RGB connector

To digital RGB

output port

To Computer 1 port

Digital video cable or DVI analog cable

(optional)

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 119 120

Sin comentarios

VDO Cyclecomputing C05 Guía de usuario Pagina 23